Sony HDW-S280 Operation Manual page 73

Item Item name
number
655 UMID RECORDING
656 MATERIAL NO.
a) Not applicable in 24/23.98PsF mode
b) Not applicable in 59.94i/29.97PsF mode
c) Applicable in 59.94i/29.97PsF mode only
Item Item name
number
a) BLANK LINE SELECT
703
Sub-Item
0 ALL LINE
In 59.94i/29.97PsF mode
12 LINE12
to to
20 LINE20
21 LINE 21
In 50i/25PsF mode
9 LINE 9
to to
22 LINE 22
23 LINE 23
a) EDGE SUBCARRIER
705
REDUCER MODE
Settings
Select the UMID type to be recorded to tape.
[OFF]: Do not record UMID.
BASIC: Record Basic UMID.
EXTND: Record Extended UMID.
Select whether to inherit the UMID in the input signal when recording a UMID.
[INPUT]: Inherit the UMID in the input signal, if it is present.
•Even when INPUT is selected, a new UMID is generated if the input signal does
not contain UMID data (the same behavior as when NEW is selected).
•When recording with inherited data, the Instance Number is newly generated
according to menu item 654, changing to a value that indicates that "this is a
copy."
•When the UMID in the input signal is a Basic UMID, a Basic UMID is recorded,
even if menu item 655 is set to EXTENDED.
•When the UMID in the input signal is an Extended UMID, the recorded UMID
follows the setting for setup menu item 655.
NEW: Generate a new UMID, regardless of whether or not the input signal contains a
UMID.
•The Basic section does not change during recording.
•An Instance Number indicating that "this is the original" is generated.
•The Source Pack Date/Time (when) changes with each frame.
•The Source Pack Spatial Co-ordinates (where) are not recorded.
•The Source Pack Stored Ownership (who) can be set. (See " Setting Stored
Ownership" on page 56.)
Items 700 to799: Settings for video control
Settings
Switch blanking on or off for individual lines in the vertical blanking interval of the SD
video signal. The Y/C signal and odd/even fields are blanked simultaneously.
[- - -]: Specify the blanking for each line separately.
BLANK: Regardless of the setting for other sub-items, blank all lines which can be
specified in this menu item.
THROU: Regardless of the setting for other sub-items, switch off blanking for all lines
which can be specified in this menu item.
Specify blanking for lines 12 to 20.
[BLANK]: Carry out blanking.
THROU: Switch off blanking.
Specify blanking for lines 21.
[BLANK]: Carry out blanking.
HALF: Carry out half-blanking.
THROU: Switch off blanking.
Specify blanking for lines 9 to 22.
[BLANK]: Carry out blanking.
THROU: Switch off blanking.
[HALF]: Carry out half-blanking.
THROU: Switch off blanking.
During playback of an SD tape, in the playback circuit the edge subcarrier reducer
(ESR) is automatically switched on or off according to the VTR operation. When playing
an SD tape with a Non-Standard signal recorded, for example, if the color edges are not
as good as with a proper signal, the ESR can be forced on.
This item makes this selection.
[AUTO]: ESR is switched on and off automatically.
ON: ESR operation is forced on.
Items in the Extended Setup Menu
73