Sony HDW-S280 Operation Manual page 71

Item Item name
number
608 PHASE CORRECTION
610 REGEN CONTROL MODE Select whether or not the timecode is automatically regenerated.
614 FIRST EDIT TC
615 FIRST EDIT HEADER
617 LTC OUTPUT PHASE
SELECT
a) UPCONV EMBEDDED
618
VITC
b) TC CONVERT 24F c 25F
620
(in 50i or 25PsF mode only)
TC CONVERT 25F c 24F
(in24PsF, 23.98PsF mode
only)
b) 24F STARTING TC SEL (in
621
50i or 25PsF mode only)
Settings
Select whether or not to carry out phase correction control on the LTC generated by the
timecode generator.
[OFF]: No control
ON: Carry out control
AE&PR: In automatic editing in assemble mode or back space editing with this unit as
the recorder, regardless of the settings of TCG and PRST/RGN on the P4 TC page
of the function menu, the timecode generator regenerates according to the
timecode on the tape.
MANU: Regardless of whether this unit is the recorder or player, the timecode
generator operates in accordance with the settings of TCG and PRST/RGN on the
P4 TC page in function menu.
[FULL]: Whether local or remote and regardless of the settings of TCG and PRST/
RGN on the P4 TC page in function menu, when ASSEMBLE on the HOME page is
set to ON or when back space editing is to be performed, the timecode generator
regenerates according to the timecode played back from the tape.
In First Edit mode, select whether or not to set the timecode value for the start when
creating the base tape for editing. When this is set to ON, set the start timecode value.
For setting the start timecode, see setup menu item 603 on page 70.
[OFF]: Do not set.
.
ON: Set
Set the number of seconds before the timecode value set by setup menu item 614 at
which the recording starts.
10S to [20S] to 30S: Set value in this range, in increments of 1 second
Set the output phase of timecode signals (LTC).
[TCG/R]: Output the playback timecode signal during playback. When the edit preset
function is on or when recording, output the timecode signal generated by the
internal timecode generator.
INPUT: Use the same phase as the input video.
OUTPUT: Use the same phase as the output video.
AUTO: Use the same phase as the input video when editing, and use the same phase
as the output video at other times (playback, recording, etc.).
Select the source timecode for HD-SDI embedded VITC which is output after subjected
to up-conversion during playback of SD-format tape.
[VITC]: Select VITC recorded on SD-format tape.
LTC: Select LTC recorded on SD-format tape.
Select whether to convert playback timecode to 25F timecode during playback of tape
recorded in 24PsF or 23.98PsF mode.
[OFF]: Do not convert timecode.
ON: Convert timecode.
Select whether to convert playback timecode to 24F timecode during playback of tape
recorded in 25i or 25PsF mode.
[OFF]: Do not convert timecode.
ON: Convert timecode.
Select whether the 24F starting timecode is set or not for timecode conversion from
24F to 25F.
[OFF]: Do not set the starting timecode.
ON: Set the starting timecode.
To set the 24F starting timecode
Press the F5 (SET) button with this menu item displayed in the menu display to enter
the starting timecode setting mode. You can then set the user starting timecode digit by
digit using the F3 (C) button and F4 (c) buttons for digit selection. When all required
digits have been set correctly, press the F5 (SET) button again to save the starting
timecode and exit from the ID code setting mode.
Items in the Extended Setup Menu
71