Sony 3-213-480-12(1) Operating Instructions Manual page 25

Video cassette recorder / dvd recorder
Table of Contents

Advertisement

9
Press ENTER.
The setup display for the component out jacks
appears.
10
Select whether or not to use the
COMPONENT VIDEO OUT jacks.
Select "On" if you are using the
COMPONENT VIDEO OUT jacks.
Otherwise, select "Off."
11
Press ENTER.
The setup display for selecting the type of
video signal output from the i LINE 1-TV
jack appears.
Easy Setup
No Disc
Select the Line1 Output signal.
Video
RGB
12
Select the type of signal you want to output
from the i LINE 1-TV jack.
"Video": Outputs video signals.
"RGB": Outputs RGB signals.
Note that if you select "On" in step 10, you
cannot select "RGB."
13
Press ENTER.
The setup display for selecting the type of jack
used to connect to your amplifier (receiver)
appears.
Easy Setup
No Disc
Is this recorder connected to an amplifier (receiver)?
Select the type of jack you are using.
Yes : LINE2 OUT(R-AUDIO-L)
Yes : DIGITAL OUT
No
14
Select the type of jack (if any) you are
using to connect to an amplifier (receiver).
If you did not connect an AV amplifier
(receiver), select "No," then go to step 19.
If you connected an AV amplifier (receiver)
using an audio cord to the LINE 2 OUT
(AUDIO L/R) or AUDIO OUT L/R jacks,
select "Yes: LINE 2 OUT (R-AUDIO-L),"
then go to step 19.
If you connected an AV amplifier (receiver)
using either a digital optical or coaxial cord,
select "Yes: DIGITAL OUT."
15
Press ENTER.
The setup display for selecting the type of
10:10
Dolby Digital signal appears.
16
Select the type of Dolby Digital signal you
want to send to your amplifier (receiver).
If your AV amplifier (receiver) has a Dolby
Digital decoder, select "Dolby Digital."
Otherwise, select "D-PCM."
17
Press ENTER.
The setup display for the DTS signal appears.
10:10
18
Select whether or not you want to send a
DTS signal to your amplifier (receiver),
and press ENTER.
If your AV amplifier (receiver) has a DTS
decoder, select "On." Otherwise, select "Off."
Easy Setup
No Disc
Dolby Digital
D-PCM
Dolby Digital
Easy Setup
No Disc
DTS
On
Off
10:10
10:10
,continued
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdr-vx450

Table of Contents