Recording From Connected Equipment Without A Timer - Sony 3-213-480-12(1) Operating Instructions Manual

Recording From Connected
Equipment Without a Timer
You can record from a connected VCR or similar
device. For connection details, see "Connecting
Another VCR or Similar Device" on page 27.
z REC
1
Press VIDEO to operate the VCR.
2
Insert a tape with its safety tab in place.
3
Press INPUT repeatedly to select an input
source according to the connection you
made.
The front panel display changes as follows:
Programme
position
4
Press REC MODE repeatedly to select the
recording mode, "SP" or "LP."
5
Insert the source tape into the connected
equipment and set to playback pause.
88
VIDEO
1 1 2 2 3 3
4 4 5 5 6 6
INPUT
7 7 8 8 9 9
0 0
x
REC MODE
LINE1 LINE2
LINE3
6
Press z REC on this recorder and the
pause or play button on the connected
equipment at the same time.
Recording starts.
To stop recording, press x on this recorder.
Notes
• A video game image may not be recorded clearly.
• You cannot record on a tape with its safety tab
removed.
• During recording or recording pause, you cannot
change the recording mode.
• You cannot change the recording mode, programme
position, or input source while recording.