Audio Settings (Audio) - Sony 3-213-480-12(1) Operating Instructions Manual

Component Out
Selects whether or not to output video signals
from the COMPONENT VIDEO OUT jacks.
On
Off
Notes
• When you set "Line 1 Output" to "RGB," you cannot
set "Component Out" to "On."
• When you connect the recorder to a monitor or
projector via only the COMPONENT VIDEO OUT
jacks, do not select "Off," as the picture will not appear.
• When you set "Progressive" to "On," you cannot set
"Component Out" to "Off."
• When you connect your TV using an HDMI cable, the
"Component Out" setting is set to "On."
Progressive
If your TV accepts progressive (525p/625p)
format signals, you will enjoy accurate colour
reproduction and high quality image.
Connect your TV to the COMPONENT VIDEO
OUT jacks (page 17), and set "Component Out" to
"On."
On
Off
Notes
• When you set "Component Out" to "Off," you cannot
set "Progressive" to "On."
• If you select progressive signals when you connect the
recorder to a TV that cannot accept the signal in
progressive format, the image quality will deteriorate.
In this case, set "Progressive" to "Off." Or, press DVD
in stop mode to operate the DVD recorder, and then
hold down X on the recorder for five seconds or more.
• When you connect your TV using an HDMI cable, the
"Progressive" setting is set to "On."
104
Outputs the component video
signals. Select this when you want
to view progressive signals.
Outputs no signals.
Sets the recorder to output
progressive signals.
Outputs video signals in interlace
format.

Audio Settings (Audio)

The "Audio" setup allows you to adjust the sound
according to the playback and connection
conditions.
Select "Audio" in the "Setup" display.
The default settings are underlined.
Audio
Title List
Digital Out
Downmix
Timer
Audio DRC
Edit
Audio (HDMI)
Dubbing
Scan Audio
Disc Setting Surround
DV Audio Input
Setup
Line Audio Input
Digital Out
Selects if audio signals are output from the
DIGITAL AUDIO OUT (OPTICAL or
COAXIAL)/HDMI OUT jack.
On
Normally select this. Press
ENTER, and select "Dolby
Digital," "DTS," or
"MPEG" for further settings
(see below).
Off
The influence of the digital
circuit upon the analogue
circuit is minimum.
The following setup items switches the method of
outputting audio signals when you connect a
component such as an amplifier (receiver) with a
digital input jack.
For connection details, see "Step 4: Connecting to
Your AV Amplifier (Receiver)" on page 18.
Digital Out
Title List
Dolby Digital
DTS
Timer
MPEG
Edit
Dubbing
Disc Setting
Setup
10:10
: On
: Dolby Surround
: Standard
: Auto
: On
: Off
: Stereo 1
: Stereo
10:10
: D-PCM
: Off
: PCM