Sony 3-213-480-12(1) Operating Instructions Manual page 94

DVD
SYSTEM
MENU
1
Press DVD to operate the DVD recorder.
2
Insert a disc.
3
Press SYSTEM MENU while the recorder is
in stop mode.
The System Menu appears.
4
Select "Disc Setting," and press ENTER.
The "Disc Setting" display appears.
Disc Setting
Title List
Disc Name
Disc Protect
Timer
Disc Format
Edit
Disc Finalise
Dubbing
Disc Information
Disc Setting Erase All Titles
Setup
5
Select "Disc Finalise," and press ENTER.
The display asks for confirmation.
Do you want to finalise this disc ?
Finalise
6
Select "Finalise," and press ENTER.
The display for confirmation appears again.
Disc will be finalised.
Do you want to continue ?
OK
94
1 1 2 2 3 3
4 4 5 5 6 6
7 7 8 8 9 9
0 0
M/m/</,,
ENTER
10:10
:
: Not Protected
: VR Mode
: Unfinalised
Unfinalise
Cancel
7
Select "OK," and press ENTER.
The recorder starts finalising the disc.
To turn off the display
Press SYSTEM MENU.
To unfinalise a DVD-RW (VR mode)
If you cannot record or edit on a DVD-RW (VR
mode) that has been finalised, unfinalise the disc
by selecting "Unfinalise" in step 6 above.
z Hints
• You can check whether the disc has been finalised or
not. If you cannot select "Finalise" in step 6 above, the
disc has already been finalised.
• To check the disc information, select "Disc
Information" in the "Disc Setting" display and press
ENTER. See page 71 for details.
Notes
• Depending on the condition of the disc, the recording,
or the DVD equipment, discs may not play even if the
discs are finalised.
• The recorder may not be able to finalise a disc if it was
recorded on another recorder.