Sony 3-213-480-12(1) Operating Instructions Manual page 106

Video cassette recorder / dvd recorder
Table of Contents

Advertisement

Audio DRC (Dynamic Range Control) (DVDs
only)
Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
"Audio DRC." This affects the output from the
following jacks:
– LINE 2 OUT (AUDIO L/R), AUDIO OUT L/R
jacks
– LINE 1-TV jack
– DIGITAL AUDIO OUT (OPTICAL or
COAXIAL)/HDMI OUT jack only when
"Dolby Digital" is set to "D-PCM."
Standard
TV Mode
Wide
Range
Audio (HDMI) (DVD VIDEOs only)
Selects the output method from the HDMI OUT
jack.
Auto
PCM
Scan Audio (DVDs only)
On
Off
Note
Sound will be interrupted during Scan Audio.
106
Normally select this.
Makes low sounds clear
even if you turn the volume
down.
Gives you the feeling of
being at a live performance.
Normally, select this.
Outputs audio signals
according to the "Dolby
Digital" setting (page 104).
Converts Dolby Digital to
PCM.
Outputs audio signals during
FF1 fast-forward of a DVD
disc with Dolby Digital
soundtracks. For details, see
page 38.
Turns off the function.
No sound is output during
FF1 fast-forward.
Surround
Turns on the surround function to create virtual
rear speakers from a stereo TV or two separate
front speakers (page 19).
Off
No surround effect
Surround1
Creates one set of virtual
surround speakers
Surround2
Creates two sets of virtual
surround speakers
Surround3
Creates three sets of virtual
surround speakers
Notes
• When the playback signal does not contain a signal for
the surround speakers, the surround effects will be
difficult to hear.
• When you select one of the surround modes, turn off
the surround settings of the connected TV or amplifier
(receiver).
DV Audio Input
Stereo 1
Records original sound only.
Normally select this when
dubbing a DV format tape.
Stereo 2
Records additional audio
only.
Mix
Records both original and
additional sounds.
Note
Select "Stereo 2" or "Mix" if you have added a second
audio channel when recording with your digital video
camera.
Line Audio Input
When recording from equipment connected to the
LINE input jacks to a DVD disc in this recorder,
select line input audio.
For details about bilingual recording, see page 49.
Stereo
Records stereo sound only.
Bilingual
Records the two different
soundtracks on DVD-RWs
(VR mode)/DVD-Rs (VR
mode). You can select either
soundtrack when playing
back the disc.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdr-vx450

Table of Contents