Sony 3-213-480-12(1) Operating Instructions Manual page 22

If you have a Sony DVD player or
more than one Sony DVD recorder
If the supplied remote interferes with your other
Sony DVD recorder or player, set the command
mode number for this recorder and the supplied
remote to one that differs from the other Sony
DVD recorder or player after you have completed
"Step 7: Easy Setup."
The default command mode setting for this
recorder and the supplied remote is DVD 3.
SYSTEM
MENU
O RETURN
1
Check that Easy Setup (page 23) has been
finished. If Easy Setup has not been
finished, first perform Easy Setup.
2
Press SYSTEM MENU.
The System Menu appears.
3
Select "Setup," and press ENTER.
Setup
No Disc
Title List
Tuner Preset
Clock Set
Timer
Video
Edit
Audio
Dubbing
Features
Disc Setting
Options
Easy Setup
Setup
22
1 1 2 2 3 3
4 4 5 5 6 6
7 7 8 8 9 9
0 0
M/m/</,,
ENTER
10:10
4
Select "Options," and press ENTER.
Options
No Disc
Title List
Language
Parental
Timer
Front Display
Edit
Command Mode
Dubbing
Factory Setting
Disc Setting
Setup
5
Select "Command Mode," and press
ENTER.
Options
No Disc
Title List
Language
Parental
Timer
Front Display
Edit
Command Mode
Dubbing
Factory Setting
Disc Setting
Setup
6
Select the command mode ("DVD 1,"
"DVD 2," or "DVD 3"), and press ENTER.
7
Set the command mode for the remote so it
matches the command mode for the
recorder you set above.
Follow the steps below to set the command
mode on the remote.
A Hold down ENTER.
B While holding down ENTER, enter the
command mode code number using the
number buttons.
Command Mode
DVD1
DVD2
DVD3
C Hold down both the number buttons and
ENTER at the same time for more than
three seconds.
To return to the previous display
Press O RETURN.
10:10
: Auto
: DVD 3
10:10
: Auto
: DVD1 No
DVD 1
DVD 2
DVD 3
Code number
number button 1
number button 2
number button 3