Disconnecting The Range From The Anti-Tip Device - Miele HR 1124 Installation Instructions Manual

Anti-tip device
In the range housing, there is an
opening  for the bolt  of the anti-tip
device. The opening allows the range to
be slid onto the anti-tip device and
back to the wall.
The locking clamp  must noticeably
engage with the bolt  so that anti-tip
protection is ensured for the range.
a Opening in the range housing
b Anti-tip device bolt
c Locking clamp with slot
The toe kick cover can only be
attached if the locking clamp  has
been slid all the way into the
appliance.
 Fit the toe kick cover on the range.
104
Disconnecting the range from
the anti-tip device

WARNING
Children and adults can tip over the
range if has not been secured. This
may lead to fatal injuries.
If you need to remove the range from
its installation space, e.g. for service,
you first need to disconnect the
appliance from the anti-tip device.
 Follow the instructions for installation
in reverse order.