Koolbreeze Climateasy 12R2 User Manual And Operator Manual page 5

17. Recycling
This marking indicates that this product should not be disposed of in normal household waste
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly at the end of its useful life. To dispose of your
unit, please use the local and collection and disposal services provided by the relevant local
authorities/agency or contact the retailer where the product was purchased for details of any
collection and disposal services they provide.
18. Do not pull, deform, stretch or modify the power supply cord, or immerse it in water. Mistreatment
of the power supply cord can result in damage to the unit and lead to a risk of electrical shock.
19. During use and when being disposed of, compliance with national refrigerant gas regulations
must be observed.
20. Keep any ventilation openings on the unit clear of any obstructions.
21. Any person who is involved with working on or disconnecting any part of the refrigerant circuit
should hold a current valid certificate from an industry-accredited assessment authority, to ensure
that they are competent to handle refrigerants safely in accordance with the appropriate
regulations and industry requirements.
22. Servicing should only be performed as recommended by the equipment manufacturer.
23. Maintenance and repairs requiring the assistance of other skilled personnel should be carried out
under the supervision of the person competent in the use of flammable refrigerants.
24. Do not operate or stop the unit by inserting or pulling out the power plug. Use the operator panel
on the unit to switch the unit on/off before removing the plug.
25. Switch off and disconnect the unit from the power supply if it produces any abnormal noise, smell,
or emits smoke.
26. When the unit has not been used for an extended period check the unit for damage prior to
starting use.
27. If the unit is damaged during operation discontinue use, disconnect from power supply and
contact the reseller for advice
28. When the air inlet cover is removed to gain access to any of the filters do not touch the exposed
cooling coil fins with your hands or any tools/implements.
5