Foreword This Instruction Guide is the universal-purpose version for the models of split wall-mounted air conditioners manufactured by our Co. The appearance of the units that you purchase might be slightly different from the ones described in the Guide, but it does not affect your proper operations and usage. Please read carefully the sections corresponding to the specific model you choose, and keep the Guide properly so as to facilitate your reference at later time.
INSTALLATION & REPAIR GUIDE Split Wall-Mounted Air Conditioner *Selection of installation positions for indoor unit* * To be installed at the position where the air delivered from the unit can reach every corner of the room; * To avoid being affected by the outdoor air; * To avoid blockage to the air inlet or outlet of the unit;...
INSTALLATION & REPAIR GUIDE Split Wall-Mounted air conditioner *Selection of installation positions for outdoor unit* * To install the outdoor unit at the places which can stand the load of the machine weight and will not cause big vibrations and noises; * To install the unit at the places not to be exposed to rain or direct sunshine, and the places with good ventilation;...
INSTALLATION & REPAIR GUIDE Split Wall-Mounted air conditioner Installation fixture of indoor unit Fig.1 Pipelines can be connected in the directions of**** ****and as indicated in Fig.1. When the pipelines Left outlet are connected to the directions of***and , a groove for the pipes has to be opened at the proper place on Left rear outlet the base stand.
INSTALLATION & REPAIR GUIDE Split Wall-Mounted air conditioner Inspections: Fig.5 a. Check if the hooks at the top and bottom are firmly fixed. Connecting pipe Connecting wires b. Check if the position of the master unit is Wall pipe properly leveled. c.
Page 7
INSTALLATION & REPAIR GUIDE Split Wall-Mounted air conditioner Torque based upon the wrench to be used Table 1 Outer diameter of Tightening torque Strengthened tightening torque copper pipe 160kgf.cm(63kgf.inch) 6.35(1/4") 200kgf.cm(79kgf.inch) 300kgf.cm(118kgf.inch) 350kgf.cm(138kgf.inch) 9.52(3/8") 500kgf.cm(197kgf.inch) 550kgf.cm(216kgf.inch) 12.7(1/2") 750kgf.cm(295kgf.inch) 800kgf.cm(315kgf.inch) 15.88(5/8") 1200kgf.cm(472kgf.inch) 1400kgf.cm(551kgf.inch) 19.05(3/4")
Outdoor Unit Protection Cover To prevent leakage in transit out the Protection Cover to expose the connector Using the other hand PROTECTION COVER to be removed Electric quick fit connector to the electric connector on the cable coming from the indoor unit Unit Protection Cover...
INSTALLATION & REPAIR GUIDE Split Wall-Mounted air conditioner Connection of power cable Fig.9 1.Remove the drawer of the outdoor unit. 2.Non-quick coupler:connect the indoor power and control wire pressing plate wires with the matched outdoor wires in accordance with the electric schematic diagram and make sure (Fig.9).
INSTALLATION & REPAIR GUIDE Split Wall-Mounted air conditioner *Choose the place where hot air and operation noise from the outlet of the outdoor unit do not annoy the neighborhood . *Things left near the outlet and inlet of the outdoor unit cause malfunction or increased operation noise .
Need help?
Do you have a question about the Wallbreeze Mk2 and is the answer not in the manual?
Questions and answers