Usage And Safety Considerations - Koolbreeze Climateasy 12R2 User Manual And Operator Manual

Usage and Safety Considerations

Please do not install, use or operate your new portable air conditioner before you have
carefully read this manual. Please retain this instruction manual for future reference.
Safety and Usage Considerations for Units Containing R290 Refrigerant
Koolbreeze Climateasy xxR2 models contain R290 refrigerant. R290 is a natural refrigerant that has
a low environmental footprint with regards to any impact on the ozone layer as well as having a low
potential to cause global warming (GWP). Because of the properties of R290 when used as a
refrigerant it is important to read and understand the information given in this section before using
your new air conditioner.
1. Do not use any methods to accelerate the defrosting process or to clean the unit, other than
those recommended by the manufacturer.
2. Do not pierce, puncture, burn, strike or subject to shock either the unit itself or any of its internal
components.
3. Be aware the refrigerant used in the unit may not produce any odor or smell if released.
4. Depending on the capacity of the unit it should be installed, operated and stored in a room with a
floor area larger than X m
5. When defrosting and cleaning the unit, do not use any tools or cleaning products other than those
recommended by the manufacturer.
6. The appliance must be stored and used in an area without any continuous sources of ignition (for
example: open flames, gas or electrical appliances).
7. Each unit contains a quantity of R290 refrigerant gas. Please refer to the rating plate or
specification table in this manual for details regarding quantity used in each model.
8. R290 is a refrigerant gas that complies with the EU directives on the environment.
9. Do not puncture any part of the refrigerant circuit.
10. If the appliance is installed, operated or stored in a non-ventilated area, the room must be
designed to prevent to the accumulation of refrigerant in the event of a leak.
11. When not in use the unit must be stored in such a way as to prevent mechanical failure or the risk
of accidental damage.
IMPORTANT!
2
. (X=10.1 for ,12000 Btu/h)
3