Side Table Height; Side Table Angle - Grizzly G9984 Owner's Manual

Figure 17. Setting miter gauge to 90°.

Side Table Height

The side table can be adjusted to accommodate
a wide range of workpieces. To adjust the side
table:
1. Loosen the lock handle shown in Figure 18.
2. Move the side table to the desired height.
3. While holding the side table at the desired
height, tighten the lock handle loosened in
Step 1.
Lock Handle
Figure 18. Lock handle for side table height.
-18-

Side Table Angle

The side table can be adjusted to accommodate
sanding at various angles. To adjust the angle
position of the side table:
1. Loosen the lock handle underneath the side
table shown in Figure 19.
2. Move the side table to the desired position.
3. While holding the side table in the desired
position, tighten the lock handle loosened in
Step 1.
Lock Handle
Figure 19. Lock handle for side table angle.
G9984/G9985 (Mfd. Since 07/18)