Base Supports
Attaching the base supports to the main base:
1. Slide the base supports under the main
machine base.
2. Using (4) M10-1.5 x 30 hex bolts, (4) 10mm
flat washers, and (4) 10mm lock washers,
secure the main machine base to the base
supports as shown in Figure 7. Be sure the
lock washer is between the hex bolt head and
the flat washer when installing.
Bolt Here
Figure 7. Attaching base supports to main base.
G9984/G9985 (Mfd. Since 07/18)
-13-