Hardware; J17 – Iocb1616 Address Chart; J17 Jumper Settings For Input/Output Assignments; J17 – Supervised Input Modes - Keyscan Aurora IOCB1616 Installation Manual

Hardware

The following reviews the hardware setup for the IOCB1616. Please be sure to review J17
to set the correct input/output assignments and the class of input and J16 to set the main
control board. Diagrams for power, communication, inputs and outputs are also included.
J17 – IOCB1616 Address Chart
Jumper J17 on the IOCB1616 determines the circuit board's input/output assignments and
input supervision. Table 1 reviews the Input/Output assignments and table reviews the
input supervision selections.
KI-00387E-10-11

J17 Jumper Settings for Input/Output Assignments

Input/Output
Assignment
# 1 - 16
# 17 - 32
# 33 – 48
# 49 – 64
J17 – Supervised Input Modes
Supervised Input Modes
Non-supervised Input or
digital input
Single end of line
supervision
Double end of line
supervision
Jumper J18
Short jumper J18 as follows:
 on a single IOCB1616 bus, short J18 on IOCB1616 board
 on a multi IOCB1616 bus, short J18 on the last IOCB1616 board only
IOCB1616 Installation Guide (Aurora 06.15)
Jumper Pins
Jumper Jumper Off
Settings Off = 0
Pins 3 – 1
Off = 0 / On = 1
0 0 1
0 1 0
0 1 1
1 0 0
Pins 5 - 4
0 0
0 1
1 1
5 4 3 2 1
Jumper On
J17
On = 1
11