Tesla 3 Series Operating Instruction page 19

1. Press  or  to select channel number and then press ENTER to start the search.
2. The search stops when programme is found and this program will be stored in the current
channel position. If you want to stop the search, press the MENU button.
ATV Manual Tuning
First select the source type of ATV. Then select ATV Manual Tuning in the Channel menu and
press ENTER button to access.
1. Highlight and press  or  tto select Storage To 1 (or any other number), Sound System
or Channel number. Then select Search and press ENTER to start the search.
• Press  for the unit to search towards higher frequency;
• Press  for the unit to search towards lower frequency;
2. The search stops when programme is found. This programme will be stored in the current
channel position. If you want to stop the search, press the MENU button.
Fine-Tune
Use it to make small adjustments to tuning of each individual channel. Fine-tune is not
necessary under normal conditions. However, in area with poor broadcast conditions,
where adjustments are necessary to improve picture and sound, use the fine-tune option.
1. Select the channel that you want to fine tune.
2. In Channel menu, select ATV Manual Tuning and press  to highlight Fine-Tune.
3. Press  or  to fine-tune until the best possible picture and sound are obtained.
Program Edit
Edit the programmes. You can press colour buttons on the remote control to skip programmes,
rename and delete programmes or move programmes, and add programmes to the favourite
list by pressing FAV button.
Signal Information
Display of the current DTV channel information.
CI Information
Allowing the user to select from the CAM-provided menu. Select the CI menu according to the
menu PC Card.
5V Antenna Power
This option is only available with DVB-T source. Select On to supply power to the TV antenna.
Select Off to turn off this function.
Software Update (OAD) (only for some regions)
Select On to allow the TV to update the system software over the air. Choosing Off will turn off
this function.
OAD Tuning (only for some regions)
When software update (OAD) is off, this option is disabled. Choosing OAD scan involves
scanning channels to find the OAD update information.
Note: Features are different in different sources, the picture is different from the actual screen
and it is intended for reference only. OSD Language
Select the OSD language.
Audio Languages / Subtitle Languages (Note 1)
Select the desired language.
TTX Language
Select TTX language for different regions.
19
ENG