Controls; Overview; Activating/Deactivating Alarm Signals - Silvercrest SKS 4 A1 Operating Instructions And Safety Instructions

Kids' sleep trainer
Hide thumbs


Table of Contents



Overview of the buttons and switches on the back of the appliance:
Main switch
Lullaby button
SET button
Arrow buttons ▲ ▼
SW button
W./W.E. slider switch

Activating/deactivating alarm signals

You can set how and if the alarm should be switched on with the main switch
Set the main switch
to be displayed with light and sound. At the set wake-up or bedtime, sounds
or a melody will play for approx. 10 minutes. In addition, the upper part of
the motif disc
the lower part with the sleeping image at bedtime.
GB │ IE │ NI
slider switch
to the position
with the awake image is illuminated at wake-up time and
Switch alarm signals on and off:
Activate alarm with light and sound,
switch on light;
Activate alarm with light only (no sound),
switch on light;
Deactivate alarm (no light, no sound),
switch off light
Press and hold for 3 seconds to play the set
lullaby; press again to stop (otherwise stops
automatically after 10 minutes)
Press and hold for 3 seconds to call up the
Press to confirm menu entries
In the standard display: display set alarm
In the menu: navigate in the respective menu
keep pressed for fast scrolling
Switch between face and time on the
Change alarm time mode:
W. = weekdays (Mon–Fri)
W.E.= weekend (Sat/Sun)
Set the brightness of the display
if the wake-up time and bedtime are
SKS 4 A1

Hide quick links:



Table of Contents

Table of Contents