Table of Contents
Advertisement
Starting Up
Setting Scent Intensity
1. Consult the Settings Table of Page 5, which provides a setting for the size
in cubic feet (length x width x ceiling height) of the space you are treating.
Use the indicated intensity setting as a starting point from which you can
increase or decrease to taste.
2. Press the power button on. Turn the dial to Program and set the intensity level
with the + /– keys. You will see the level numbers (1 to 50) on the right side of
the screen.
Hint: There are many variables involved in finding the right settings for scent.
Feel free to adjust to taste. Do not set scent level to maximum setting or
higher than recommended in the table on page 5, but start from recommend-
ed lowest level and increase progressively for optimum results.
The Last Step
1. Set the dial to either 24/7 or Program if you have programmed a start/stop time.
2. Make sure the power is on. The blue light will show through the button.
3. Close and lock the door, storing the key in a known place.
Maintenance
Cartridge Change
Change cartridge when empty, or to change scent.
Wear gloves or wash your hands after manipulating the cartridge. Flush eyes imme-
diately with clean water if fragrance accidentally gets into your eyes.
Removing the Used Cartridge
1. Open the door and unlock if needed.
22
Advertisement
Table of Contents
