Prolitec Air/Q 565 User Manual page 12

Installation
E. Wall Mounting or Duct Mounting the Air/Q 565 Machine
Step 1 — Mounting Kit, Parts and Tools
The mounting kit provided with the Air/Q 565 (see details on Page 6) includes a
mounting plate, which holds the appliance to the wall or duct surface; 4 screws and
wall anchors suitable for attaching the mounting plate to drywall and 4 sheet-metal
screws suitable for attaching the mounting plate to ductwork; 2 short flat-head
screws to attach the bracket to the wall; and 2 long, round-head screws to secure
the machine after it has been attached to the mounting plate. Use appropriate
fasteners when mounting on another surface.
You will need the following tools:
1. A level.
2. A hammer (if drywall installation)
3. A Phillips screwdriver.
4. A pointy tool (pen, pencil or
small screwdriver).
5. A 1/8" drill bit.
6. A 3/8" step drill bit.
7. A drill.
10