Safety And Hazards - Mec 69 Series Operator's Manual

Secton 3 - Safety Rules and Hazards
Electrocution Hazards
This machine is not electrically insulated and will not provide
protection from contact with or proximity to electrical current.
Maintain safe distances from electrical power lines and
apparatus in accordance with applicable governmental
regulations and the following chart.
Voltage
Phase to Phase
0 to 300V
300V to 50kV
50kV to 200kV
200kV to 350kV
350kV to 500kV
500kV to 750kV
750kV to 1000kV
Allow for platform movement, electrical line sway or sag and beware of strong or gusty winds.
Keep away from the machine if it contacts energized power lines. Personnel on the ground or in the
platform must not touch or operate the machine until energized power lines are shut off.
Do not operate the machine during lightning or storms.
Do not use the machine as a ground for welding.
Tip-over Hazards
Occupants, equipment and materials must not exceed the maximum platform capacity or the
maximum capacity of the platform extension.
Platform allowable maximum load
Extension deck allowable maximum load
Work Area Safety
Do not raise the platform unless the machine is on a firm, level
surface.
Page 5

Safety and Hazards

Minimum Safe Approach Distance
Feet Meters
Avoid Contact
10
15
20
25
35
45
Maximum capacity
69 Seres - Operator's Manual
3.05
4.60
6.10
7.62
10.67
13.72
3369
1000 lb 454 kg
300 lb 136 kg
February 2019
4069
800 lb 363 kg
300 lb 136 kg