Makita DHP482 Technical Information page 3

P 3/ 11
1－4
11. Use 1R359 to remove Keyless drill chuck if it cannot be removed in previous step.
12. Assemble Gear assembly by referring to the drawing below.
13. Apply a small amount of Makita grease FA No. 2 if needed.
Lock
Spur gear 17D Spur gear 10 (x5) Gear case C
Carrier Lock ring
cam
Pin 3.5 (x2) Steel ball 5 (x6)
Speed change cam
Internal gear 38
Gear case A
Internal gear 39D
Motor bracket
Spur gear 18 (x4) Spur gear 16-39E
Washer
Tapping screw
Change lever Headed pin 1.2 (x2)
Spur gear 11D (x5)
Internal gear 49
29
3x30 (x4)
Makita Corporation