Changing The Sound - Sony DVP-S570D Operating Instructions Manual

Labeling the Disc
5
Repeat steps 3 and 4 to input other characters.
6
When you have entered all the characters for the
Disc Memo, press INPUT on the remote.
The Disc Memo is stored.
1 2 ( 2 7 )
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
TIME/MEMO
Disc Memo
BRAHMS SYMPHONY NO – 4
To correct the characters
• To erase the characters:
1 Move the cursor to the character you want to erase
by pressing . or >.
2 Press CLEAR.
• To insert or overwrite the characters:
1 Move the cursor to the character you want to correct
by pressing . or >.
2 Select the correct character by pressing </M/m/,
or by turning the click shuttle.
3 To insert the character, press ENTER.
To overwrite, don't press ENTER but move the
cursor by pressing . or >.
z
You can display the Disc Memo input display using the
remote
Press INPUT on the remote.
Notes
• Do not turn off the player by pressing !. Doing so may cancel
the settings. When you turn off the player, press x first to stop
playback and then press ?/1 on the remote. After the power
indicator lights up in red and the player enters standby mode,
press ! on the player.
• You can label up to 200 discs. When you have the player store
over 200 discs in memory, each new Disc Memo erases the
oldest Disc Memo from those first stored.
32

Changing the Sound

If the DVD is recorded with multilingual tracks, you can
select the language you want while playing the DVD.
If the DVD is recorded in multiple audio formats (PCM,
Dolby Digital or DTS), you can select the audio format
you want while playing the DVD.
PLAY
With multiplex CDs or VIDEO CDs, you can select the
DVD
sound from the right or left channel and listen to the
sound of the selected channel through both the right and
left speakers. In this case, the sound loses its stereo effect.
For example, with a disc containing a song, the right
channel may output the vocals and the left channel may
output the instrumental. If you only want to hear the
instrumental, you can select the left channel and hear it
from both speakers.
Select "AUDIO" after pressing DISPLAY.
x AUDIO
When playing a DVD
Select the language. The languages you can select are
different depending on the DVD. When 4 digits are
displayed, they represent the language code. Select the
language code from the list on page 74.
When the same language is displayed two or more times,
the DVD is recorded in multiple audio formats. The
current audio format is shown on the "PROGRAM
FORMAT" display.
When playing a VIDEO CD or a CD
The default setting is underlined.
• STEREO : The standard stereo sound
• 1/L : The sound of the left channel (monaural)
• 2/R : The sound of the right channel (monaural)
1 2 ( 2 7 )
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
1: ENGLISH
1: ENGLISH PROGRAM FORMAT
2: FRENCH DOLBY DIGITAL 3/2.1
3: SPANISH
L
LS
AUDIO
Select: Cancel:
ENTER
PLAY
DVD
C R
LFE
RS
RETURN