Settings For The Sound (Audio Setup) - Sony DVP-S570D Operating Instructions Manual

Custom Settings (CUSTOM SETUP)
x PLAYBACK MEMORY
The player can store the SUBTITLE, VIDEO EQUALIZER,
and other settings of each disc for up to 200 discs
(Playback Memory).
Set the Playback Memory function on or off.
• ON : stores the settings in memory when you eject the
disc.
• OFF : does not store the settings in memory.
The following settings are stored in memory by the
Playback Memory function.
– AUDIO (page 32)*
– SUBTITLE (page 34)*
– ANGLE (page 35)*
– VIRTUAL 3D SURROUND (page 36)
– VIDEO EQUALIZER (page 46)
– DIGITAL VIDEO ENHANCER (page 48)
* DVD only
Notes
• The player can store the settings of up to 200 discs. When you
store the setting of disc number 201, the first disc setting is
canceled.
• Depending on the DVD, the information stored in the disc
takes priority over the Playback Memory settings and the
function does not work.
• Do not turn off the player by pressing !. Doing so may cancel
the settings. When you turn off the player, press x first to stop
playback and then press ?/1 on the remote. After the power
indicator lights up in red and the player enters standby mode,
press ! on the player.
x TRACK SELECTION
Gives the sound track which contains the highest number
of channels priority when you play a DVD on which
multiple audio formats (PCM, DTS or Dolby Digital
format) are recorded.
• OFF : No priority given.
• AUTO : Priority given.
Notes
• When you set this item to "AUTO," the language may change
depending on the "AUDIO" settings in "LANGUAGE SETUP."
The "TRACK SELECTION" setting has higher priority than the
"AUDIO" settings in "LANGUAGE SETUP" (page 54).
• If you set "DTS" in "AUDIO SETUP" to "D-PCM", the DTS
sound track is not played even if you set this item to "AUTO"
and the highest-numbered audio channel is recorded in DTS
format.
• If PCM, DTS and Dolby Digital sound tracks have the same
number of channels, the player selects PCM, DTS and Dolby
Digital sound tracks in this order.
• Depending on the DVD, the audio channel with priority may
be predetermined. In this case, you cannot give priority to the
DTS or Dolby Digital format by selecting "AUTO."
60
Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the sound according
to the playback conditions.
The default settings are underlined.
Select "AUDIO SETUP" in the setup display.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
CENTER SPEAKER EQ:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
To set, press
To quit, press
DISPLAY
x AUDIO ATT (attenuation)
If the playback sound is distorted, set this item to "ON."
The player reduces the audio output level.
Selects the setting of the output from the AUDIO OUT
(1, 2) connectors according to the audio equipment to be
connected.
• OFF: turns off the audio attenuation. Normally select
this position.
• ON: reduces the audio output level so that no sound
distortion occurs. Select this when the playback sound
from the built-in TV speakers is distorted.
Note
The setting does not affect the output from the DIGITAL OUT
OPTICAL and COAXIAL connectors.
x AUDIO DRC (Dynamic Range Control)
(DVD only)
Makes the sound clear when the volume is turned down
when playing a DVD. This function works only when
you play a DVD which has the AUDIO DRC function.
This affects the output from the DIGITAL OUT connectors
only when "DOLBY DIGITAL" is set to "D-PCM" and
"DTS" to "D-PCM" in "DIGITAL OUT."
• STANDARD: Normally select this position.
• TV MODE: makes the low sounds clear even if you turn
the volume down. It is especially recommended when
you listen to the sound using the speakers of the TV.
• WIDE RANGE: It gives you the feeling of being at a live
performance. This function only works when you are
playing a Dolby Digital disc and is more effective when
you connect 6 speakers using the 5.1 channel
connectors. When you use high quality speakers, it is
even more effective.
Note
When you play DVDs without the AUDIO DRC function, there
may be no effect on the sound.
OFF
STANDARD
FLAT
DOLBY SURROUND
ON
D-PCM
D-PCM
48kHz/16bit
, then ENTER .
.