General Menu (Emulation) - IBM 3151 User Manual

GENERAL Menu (emulation)
Setup Possible
Parameters
Values
Meanings
~~~
On-Line/Local ON-LINE The display station operates in on-line mode and can
communicate with a host system.
~-~)
LOCAL The display station operates in local mode. Data entered
from the keyboard is displayed only on the screen. Data
cannot be sent, and data received from the host system is
not displayed until
ON-LINE
is selected.
Transparent
OFF
I
ON
Transparent mode is equivalent to display control mode in
Mode the DEC VT220. When
ON
is selected, commands are
handled as character strings. This means that the control
characters (except the LF, VT, and FF characters) are
displayed on the screen without performing their functions.
This mode may be used for debugging programs.
Machine
VT200 CONTROL 7
The display station operates in the selected machine mode.
VT100
Mode
VT52
VT200 CONTROL 8
Operation ECHO Data entered from the keyboard is sent only to the host
Mode system; it is not displayed. Echo mode is equivalent to no
local echo mode in the DEC VT220.
CHAR
Data entered from the keyboard is sent to the host system
and displayed on the screen. Character mode is equivalent
to local echo mode in the DEC VT220.
VT100 ID
VT220
This parameter is only effective when you select
VT100
for
VT100
the machine mode. The display station returns the selected
VT101
response for the Device Attribute command.
VT102
Figure 3-1 (part 1 of 1). Setup Parameters io the GENERAL Menu (emulation)
3-4
User's
Guide
for the Cartridge to Emulate IBM and DEC Terminals