Defining Function Keys (IBM Mode)
Defining Function Keys (IBM Mode)
You can define function keys
F1
through
F36
from the keyboard or by the host
command. The operation of defining function keys is exactly the" same as that in
native mode.
After making the definition of each function key,
F13
through
F24
are selected
when
FI
through
F12
are pressed respectively, with the
Shift
key;
F25
through
F36
are selected when
FI
through
F12
are pressed with the
Shift
key and
Gtrl
key.
ESC sequences, or character strings can be assigned to each function key.
Figure 2-5 shows location of the keys used for this step.
Ctrl ESC (Oef F)
Send
Clear
Figure 2-5.
Keys Used for Defining FUDction Keys (IBM Mode)
2-36
User's
Guide for the Cartridge to Emulate
IBM
and DEC Terminals