Table of Contents
Advertisement
•
b
•
•
Step 12A. Defining Setup Values (emulation)
Refer to Figure 3-15 on page 3-23; select the field and change
the value, if needed .
1
Using the Cursor Move keys (t ~ .- -.), select any field (high-intensity
box) whose value you want to change.
2
Press the Space Bar to display each value. Do this until the desired value
appears.
3
Repeat steps 1 and 2 until you have changed all necessary values.
Note: For the answerback message, key in the characters (up to 30
characters) instead of pressing the Space Bar.
4
Select the next menu by pressing the Enter key, and change all necessary
values. Follow the same procedures for all menus
(GENERAL, DISPLAY,
COMMUNICATION, KEYBOARD, and PRINTER),
except the
FUNCTION
menu, which has different purposes.
DOD
~ ~~~§
BmB
CIJI
i
i
Setup
Space Bar
Cursor Move
Enter
If
You Need Help
If you do not understand the above procedures, see "How to Define Setup
Values" on page 3-33 for a more detailed explanation.
Chapter 2. Setup Procedures
2-27
Advertisement
Table of Contents
