Operator Messages
•
Area
Message
Meaning
Action
4
PRINT CONTROLLER
Shows that the display
None.
station is in printer
controller mode when
ON-LINE
is selected for
the On-Line/Local
option.
Shows that the display
station is in local
controller mode when
LOCAL
is selected for the
On-Line/Local option.
PRINTING
Shows that data is being
None.
sent to the optional
device on the auxiliary
port.
•
Note: This message
does not appear in
printer control mode.
5
INSERT
Shows that insert mode
None.
was selected by the Set
Insert Mode command.
The display station exits
this mode by the Reset
Insert Mode command.
Figure 4-2 (part 5 of 6). Operator Messages
•
Chapter 4. Interpreting Operator Messages
4-7