Administration; Web Interface Access; Restart And Resetting The Default Settings - insys icom GPRS 5.1 Manual

Functions
12.6

Administration

The user name and the password for the access to the web interface are configured on
the "Administration" page. Moreover, it is possible to execute a restart and a reset to de-
fault settings.
12.6.1

Web Interface Access

Access to the web interface of the INSYS GPRS 5.1 Ethernet is protected by user name
and password. The default settings for user name and password are "insys" and "gprs".
Configuration with the
In order to specify the user name for web interface access, enter this under
"Admin name".
In order to specify the password for web interface access, enter this under
"Admin password". To confirm th
more into the field below.

User name and pa
Save your settings by clicking "OK".

Changed settings become only effective after a restart.
12.6.2

Restart and Resetting the Default Settings

You can reset the INSYS GPRS 5.1 Ethernet via the web interface or by pressing the reset
key on the front of the device. You can simply restart your device or reset all settings to
factory defaults. Using the reset key, you can initiate a hardware reset by pressing it once
for at least one second. A restart via the web interface initiates a software reset. A restart
will be made in both cases. Pressing the reset key five times within ten seconds resets the
INSYS GPRS 5.1 Ethernet to default settings.

When restoring the default settings, the IP address and web interface ac-
cess data will be reset, a configured PIN will be preserved.
Configuration with the web interface
In order to make a restart, click under "Reboot Router" on the "Reboot" button.
In order to restore the default settings, click under "Reset to factory defaults"
on the "Reset to factory defaults" button.
Save your settings by clicking "OK".
44
web interface
e correct entry, enter the password once
ssword will be reset when resetting to default settings.
INSYS GPRS 5.1