Gsm/Gprs; Establishment Of The Wan Connection; Mobile Radio Parameters - insys icom GPRS 5.1 Manual

INSYS GPRS 5.1
12.2

GSM/GPRS

The WAN connection es
out/login or the periodic
"GSM/GPRS" page.
12.2.1 Establish
The WAN connection can either b
The W AN connection will be re-established f
for an auto matic connection establishment. If the connection establishment is controlled
via input 1 , the connection will be established, if input 1 is closed, i.e. connected to GND.
As soon as the connection is established, output 1 will be enabled. Output 1 remains en-
abled as long as the connection is established. If input 1 is opened again, the WAN con-
nection wi ll be terminated again.
Confi guration with the web interface
In order to establish the WAN connection automatically, select under "WAN-
LINK" the radio button "always on".
In order to establish the WAN connection controlled via input 1, select
"WAN-LINK" the radio button "controlled by Input IN1".
Save your settings by clicking on "Save".

Changed settings become only effective after a restart.
12.2.2

Mobile Radio Parameters

Besid es the PIN of the SIM card and the GPRS access data, the selection of the network
provid er will be specified here. If no network provider is sp
network se lection will be made, i.e. the INSYS GPRS 5.1 Ethernet tries to register with t
own netwo rk provider. If this fails, the INSYS GPRS
strongest a vailable network provider. If an exclusive network provider is specified, the
INSYS GPR S 5.1 Ethernet will only try to register with this. If a preferred network provid
is specified, an automatic network selection
vider is not available.
The INSYS GPRS 5.1 Ethernet will need the PIN of the inserted SIM card (if the SIM card is
protected by a PIN) to register with the mobile network and establish
tions.
It is necessary for a CSD connection to enter a phone number (e.g. the Internet provider).
For a packet-based connection (GPRS/EDGE), the APN (Access Point Name) of your net-
work provider must be entered. Depending on the network provider, a user name and a
password may be necessary for the PPP dial-up. "*99***1#" must be entered as phone
number for a packet-based connection.
tablishment, the mobile radio parameters, the periodic log-
restart and the connection check are configured on the
ment of the WAN Connection
e establish ed automatically or controlled via input 1.
ollowing every restart and every interruption
ecified here, an automatic
5.1 Ethernet registers with the
will be made, if the preferred network pro-
Functions
under
he
er
CSD or IP connec-
37