Permissible Technical Limits; Responsibilities Of The Operator; Qualification Of The Personnel; Instructions For Transport And Storage - insys icom GPRS 5.1 Manual

Safety
2.2

Permissible Technical Limits

The product is only intended for the use within the permissible technical limits specified
in the data sheets.
The following permissible limits must be observed:
 The ambient temperature limits must not be fallen below or exceeded.
 The supply voltage range must not be fallen below or exceeded.
 The maximum humidity must not be exceeded and condensate formation
must be prevented.
 The maximum switching voltage and the maximum switching current lo-
ad must not be exceeded.
 The maximum input voltage and the maximum input current must not be
exceeded.
2.3

Responsibilities of the Operator

As a matter of principle, the operator must observe the legal regulations, which are valid
in his country, concerning operation, functional test, repair and maintenance of electrical
devices.
2.4

Qualification of the Personnel

The installation, commissioning and maintenance of the product must only be per-
formed by trained expert personnel, which has been authorised by the plant operator.
The expert personnel must have read and understood this documentation and observe
the instructions.
Electrical connection and commissioning must only be performed by a person, who is
able to work on electrical installations and identify and avoid possible hazards independ-
ently, based on professional training, knowledge and experience as well as knowledge of
the relevant standards and regulations.
2.5

Instructions for Transport and Storage

The following instructions must be observed:
 Do not expose the product to moisture and other potential hazardous en-
vironmental conditions (radiation, gases, etc.) during transport and stor-
age. Pack product accordingly.
 Pack product sufficiently to protect it against shocks during transport and
storage, e.g. using air-cushioned packing material.
Check product for possible damages, which might have been caused by improper trans-
port, before installation. Transport damages must be noted down to the shipping docu-
ments. All claims or damages must be filed immediately and before installation against
the carrier or party responsible for the storage.
10
INSYS GPRS 5.1