User's Guide
Select Set up Scanner connection again (for new network router or changing USB to network, etc.) on the
Install Software screen, and then click Next. Follow the on-screen instructions.
Disabling the Network Setting from the Control Panel
You can disable the network settings.
1. Press the
button for more than 3 seconds to disable a Wi-Fi and AP mode connection.
The
light and
Note:
Press the
button to re-connect Wi-Fi and AP mode.
Restoring the Network Settings from the Control
Panel
You can restore all network settings to their defaults.
1. Turn the scanner off.
2. While holding down the
The
light and
Network Settings
light turn off when these are disabled.
button, press the
light flash alternately and then turn off when restoration is complete.
button until
light and
72
light turn on simultaneously.