Siemens SIMATIC S5 Equipment Manual page 97

Matching Module 4 for Absolute Encoders
Up to an encoder resolution of 17 bits maximum, the basic module can execute a software-based
DIP switch encoder matching module
With an encoder resolution between 18 and 20 bits no binary/BCD conversion is executed on the
basic module. Therefore, the setpoints must be specified in binary code (maximum FFFFF).
DIP switch encoder matching module
Up to an encoder resolution of
executed on the basic module.
DIP switch encoder matching module
In this case, however no control bit evaluation is possible.
7 – 6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
10 bits maximum, an expedited binary/BCD conversion can be
R 02/92