Table of Contents
Advertisement
4
Display
The tester is equipped with a clear LCD display that is used to show measured value, mode
indicators and unit indicators.
INDICATOR
MEAS
CAL
SETUP
HOLD
ATC
5
Prior to Use
●
Remove the electrode protective cap from tester.
●
Soak the electrode for a few minutes in tap water to remove dirt and oil stains on the
electrode.
ppm ppt
m
u S
DESCRIPTION
Indicates tester is in the measurement mode
Indicates tester is in the calibration mode
Indicates tester is in SETUP mode
Indicates the measured value has been frozen
Indicates temperature compensation is enabled
© PCE Instruments
3
Advertisement
Table of Contents
