Lorentz PS2-150 Series Manual For Installation And Operation page 67

10.1 LED Status
System status of controller
Pump status indicator
Source low indicator
Remote switch indicator
Local communication
Operating the Pump
Power is present, ON/OFF switch is in ON
green light
position
green light Pump in standby mode due to settings or
flashing ON/OFF switch in OFF position
no light Insufficient power input
green light Pump is on
green light
Flashing frequency indicates pump rpm
flashing
no light Pump is not running
red light Check with PumpScanner
red light Flashing indicates overtemperature of the
flashing controller
Well probe or water sensor has detected a
red light
low water source
red light Flashing indicates a "source low" incident
flashing since the controller was switched on
no light Water source is okay
red light Remote switch triggered, pump stopped
no light Remote switch not triggered
blue light Bluetooth connection active
blue light
Update
flashing
no light Currently no Bluetooth connection
65