Design Features
Optimised operating costs:
Check valve, built into the dis-
charge chamber, designed for low
loss of head.
Hydraulic profiles are optimized for
the attainment of high efficiencies.
Oversized intermediate bearings
located at each pump stage to
align the shaft, specially designed
to optimize lubrication.
Coupling and flange suitable
for motors with pump mount-
ing dimensions in accor-
dance with NEMA standards.
26
UPA 100C
Resistance to corrosion and abra-
sion, i.e. the same inherent qualities
of stainless steel.
Reliable in service:
Very strong construction: minimum
thickness of stainless sheet steel of
1 mm, 6 spot welding on each vane,
special top bearing for every pump.
Friendly service:
Great ease of dismantling and as-
sembly.
Easy-to-replace wear-rings and
bearings.