Digi-Switch - PowerBox Systems Digi-Switch Operating Instructions Manual

Dear customer,
Congratulations on your decision to purchase the Digi-Switch from our range.
This innovative product is the world's first multi-function switch system, developed and pro-
duced by PowerBox Systems (Modellbau-Deutsch). Designed specifically for use with
modern, lightweight Lithium-Polymer cells, the unit incorporates an ultra-reliable electronic
switch which provides a substantial improvement in switch security.
The robust switch housing accommodates the modern electronic switch itself, a high-
performance linear IC-controlled voltage stabilization circuit and a four-stage voltage moni-
tor (LED: green, orange, red, flashing red) designed for use with a two-cell (7.4 V) LiPo bat-
tery.
The dual connecting leads have a conductor cross-section of 0.34 mm², and are both sol-
dered directly (i.e. in a straight line) to extra-wide solder pads, where they are encased in a
special support adhesive for additional protection from possible vibration damage.
We recommend the Digi-Switch for the following applications and types of model:
- Small to medium-sized model aircraft with up to five standard-sized servos
- F3A models - for which it is the perfect solution
- Gliders with up to seven or more servos, according to servo size, model size and type
of flying (thermal flying or aerobatics)
- Helicopters, electric or glow-powered, with a rotor diameter of up to 1.0 m and max. five
standard servos
- RC cars - electric or glow-powered (1 : 10 to 1 : 8)
- Model boats
- Ignition systems for petrol engines designed to be operated on the voltage of a four-cell
NC battery (DA, ZDZ and many others)
- 3 -

Digi-Switch