2. Technical Explanation
2.1 The water flow of pulsator
Beat Screw
Beat Flash
Beat Tide
2.2 Air Dry Course
When the tub is rotating, it can suck dry air inlet and keep the tub dry.
Purpose to prevent mold growing on the surface of the tub and the outer tub.
A powerful motor rotates the Big Beat (BB)
Flapper to create a vortex.
Rotating fins on the bottom suck in water
Bottom
which is pumped to the upper nozzle and
released as a high-pressure splash.
Top
(1)Stream of a big horizontal rotation is made
from the big outer blades of Pulsator.
(2) The stream of a small horizontal rotation is
made fromthe small blades of Pulsator.
(3)Special designed Pulsator and control by
software to produce Dancing Water flow.
‐2‐
Strong splashes are sprayed
over a wide area