Technical Descriptions - Panasonic NA-FS16G2 Service Manual

2.Technical Explanation
2.1 The water flow of pulsator
Beat Screw
Beat Flash
Beat Tide
2.2 Air Dry Course
When the tub is rotationg, it can suck dry air inlet and keep the tub dry.
Purpose to prevent the mould growth on the surface of the tub and
the outer tub.
A powerful motor rotates the Big Beat (BB)
Flapper to create a vortex.
Rotating fins on the bottom suck in water
Bottom
which is pumped to the upper nozzle and
released as a high-pressure splash.
(1)Stream of a big horizontal rotation is made
Top
from the big outer blades of Large Pulsator.
(2)The stream of a small horizontal rotation is
made fromthe small blades in the center part
of Large Pulsator.
(3)The stream in the vertical direction made
from the blades of Small Pulsator (Pulsator
cap), it is pushed in the direction of the
perimeter of the tub by a small horizontal
rotation stream of the above-mentioned of
(2), and it becomes a diagonal stream.
-2-
Strong splashes are