Glossary - Q Acoustics Media 3 Owner's Manual

10. Glossary

Feature Summary
ASS – Q Acoustic's intelligent pre-amplifier removes the need for a remote control
through a signal sensing matrix to enable Automatic Source Selection and auto on
/ off.
MoviEQ – Q Acoustic's Movie EQ helps to maximise the drama and excitement of a
movie soundtrack.
NFC – Near Field Connection allows simple connection of Bluetooth devices by
tapping the NFC location on the Q Acoustics speaker.
HDMI ARC – High Definition Multimedia Interface Audio Return Channel removes the
need for additional Optical or Analogue audio cables between source and speaker.
CEC – Consumer Electronics Control synchronises TV remote control of Volume, Mute
and Standby for easy integration of our Q Acoustics speaker.
Bluetooth – An international wireless connection used for streaming audio from all
compatible devices.
aptX – A high definition audio CODEC used for Bluetooth streaming.
AVRCP – A Bluetooth control protocol that synchronises your device control of Volume
and Mute for easy integration with our Q Acoustics speaker.
BMR – Balanced Mode Radiators are the preferred choice for evenly filling an entire
room with sound.
DVC – The Dual Voice Coil subwoofer is Q Acoustics' subwoofer driver of choice. It
has two voice coils in one driver for greater flexibility of design and improved bass
control.
Location EQ – User control of EQ setting for best acoustic performance. This can be
changed dependent upon speaker position, mounting, or user preference.
LSV – Q Acoustic's Low Source Volume switch increases the incoming signal level to
get maximum performance from your system when connected to low output signal
equipment via HDMI or Optical.
Lip Sync – Adjustable delay for lip synchronisation between TV / screen and Q
Acoustics speaker.
23