8.11. Lip Sync
The Unit has a lip sync feature for its HDMI and Optical inputs. This allows up to 50ms of delay to
be added to the audio for synchronisation with a screen. When in Lip Sync mode, the lip sync is
adjustable in 10ms steps using the Vol + and – buttons.
To enter Lip Sync mode simply double tap the Bluetooth Pair button on the Rear Panel of the Unit.
The lip sync time is then adjusted and displayed by the following flash pattern, the LED will
maintain the colour of the currently selected source:
0ms
= 2 flash
10ms = 4 flash
20ms = 6 flash
30ms = 8 flash
40ms = 10 flash
50ms = 12 flash
After 30 seconds of no other button presses the Unit will exit Lip Sync mode and return to normal
operation. You will only have to set Lip Sync once for each of HDMI and optical, as the unit
remembers delay times for each separately.
18