Stages Of Unpacking; Unpacking - Contents Of Package - GRAVOGRAPH IM4 User Manual

Stages of unpacking

After opening the box (pict. 1):
1. Take out the manual.
2. Take out the toolbox and the cable.
3. Take out the machine.
Shows where you should put your hands (pict. 2).
Keep all the packaging materials so that you can move your machine in total safety.
This packaging is in conformity with European recycling standards.

Unpacking - Contents of package

Contents of package
(pict. 3)
A.
C.
D.
E.
F.
Contents of tool box
(pict. 4)
D1.
D2.
D3.
First contact
Before opening the cardboard box, check that it is the right way up.
Never lift or move this machine by its arm (pict. 2).
Make sure that no components are missing from the packaging. If any part has been
forgotten please get in touch with your GRAVOGRAPH dealer.
Check the condition of the packaging when you receive it. If there are any signs of
damage, inform the carrier and your GRAVOGRAPH dealer immediately by recorded
delivery, specifying the exact nature of the problem.
An IM4 machine (a depth-regulating nose and a pair of jigs mounted on the machine)
A manual to be placed into a folder, with a label to stick along the spine of the folder
A tool box
A power cable
A serial connection cable (RS232)
a short allen key
a brush
two fuses T 2 A H - 250V *
T 2 A H - 250V * = These fuses are temporized, with a high breaking capacity and
comply with the IEC 127-2 norm.
IM4 machine . 7