Rear View Of The Machine - GRAVOGRAPH IM4 User Manual

Rear view of the machine

N. Connection socket - engraving table (diagram 1)
N1 -
N2 -
N3 -
N4 -
IM4 machine . 10
Each connection responds to one of the following security levels :
- Dangerous voltage.
- Very low security level.
Links the engraving table with the electronics box - Very low security level
Mains supply plug with 2 fuses drawer T 2 A H - 250V * - Dangerous voltage
T 2 A H - 250V * = These fuses are temporized, with a high breaking capacity and
comply with the IEC 127-2 norm.
Serial port - Very low security level
Do not use
The machine must always be switched off before connecting or disconnecting a cable
as indicated on label
To avoid any risk of electrical shock, always disconnect the power cord before
removing this cover (label
displayed on the back of the machine :
).
2 A T
First contact