Subscribe to Our Youtube Channel
Related Manuals for Burkert 2036
Summary of Contents for Burkert 2036
- Page 1 Type 2036 Robolux multiple-way diaphragm valve Robolux Mehrwege-Membranventil Vanne à membrane multivoies Robolux Quickstart English Deutsch Français...
- Page 2 We reserve the right to make technical changes without notice. Technische Änderungen vorbehalten. Sous réserve de modifications techniques. © 2013 - 2018 Bürkert Werke GmbH & Co. KG Operating Instructions 1807/02_EU-ML_00810360 / Original DE...
-
Page 3: Table Of Contents
A detailed description of the BASIC SAFETY INSTRUCTIONS .......... 5 device can be found in the operating instructions for Type 2036. Keep these instructions in a location which is easily accessible GENERAL INFORMATION ............ 6 to every user, and make these instructions available to every new TECHNICAL DATA .............. -
Page 4: Authorized Use
AUTHORIZED USE DANGER! Improper use of the Robolux multiway diaphragm valve Type 2036 may represent a hazard to persons, neighboring Warns of an immediate danger. equipment and the environment. ▶ Failure to observe the warning will result in a fatal or serious injury. -
Page 5: Basic Safety Instructions
Type 2036 Basic safety instructions BASIC SAFETY INSTRUCTIONS WARNING! These safety instructions do not make allowance for any Risk of burns. • Contingencies and events which may arise during the installation, The surface of the device may become hot during long-term operation, and maintenance of the devices. -
Page 6: General Information
▶ Do not make any external alterations to the valves. Do not apply Information on the Internet paint to body parts or screws. The operating instructions and data sheets for Types 2036 can be found on the Internet at: www.burkert.com... -
Page 7: Technical Data
Control functions (CF) Control function A, NC (CFA) Conformity 2(A) Closed by spring force in rest position. The diaphragm valve of Type 2036 conforms with the EU Directives according to the EU Declaration of Conformity. 1(P) Control function B, NO (CFB) 2(B) - Page 8 Type 2036 Technical Data Fluidic data 5.7.1 Pressure ranges Pilot pressure and operation pressure for CFA, NC Media flow media ultra-pure, sterile, aggressive, Values for stainless steel valve body Media pressure see chapter "5.7.1 Pressure ranges" Max. operation pressure [bar]...
- Page 9 Type 2036 Technical Data Remarks Pilot pressure and operation pressure for CFB, NO Static leak-tightness: The following graphs illustrate the required minimum pilot pressure depending on the medium pressure for control function Valve is closed (diaphragm is in contact with the body seat). One side of the body seat is under pressure.
-
Page 10: Assembly
Type 2036 Assembly Valve marking ASSEMBLY Safety instructions Type label DANGER! Marking and warning Risk of injury from high pressure in the equipment/device. notices in Ex area ▶ Before working on equipment or device, switch off the pres- sure and deaerate/drain lines. -
Page 11: Before Installation
Type 2036 Assembly Before installation • Before connecting the valve, ensure the pipelines are flush. • Pay attention to the flow direction. 6.2.1 Installation position • The piston-controlled diaphragm valve can be installed in any Actuator position, preferably with connection B downwards. - Page 12 Type 2036 Assembly 6.3.1 Installing the valve body WARNING! Welded connection Risk of injury from discharge of medium and release of → Weld valve body in pipeline system. pressure. Other valve body designs ▶ Tighten the body screws sufficiently (see "Tab. 2").
- Page 13 Type 2036 Assembly Pneumatic connection Control function A: → Connect the control medium to the pilot air port 1 and/or 3 (see "Fig. 7"). WARNING! Risk of injury from unsuitable connection hoses. Control function B: Hoses which cannot withstand the pressure and temperature →...
-
Page 14: Electrical Control Unit
Type 2036 Electrical control unit ELECTRICAL CONTROL UNIT Actuator Actuator 1 Actuator 2 version The electrical connection of the pilot valve / control unit Connection Connection is described in the operating instructions for the pilot D11, D55 Pilot air Pilot air valve / control unit. -
Page 15: Maintenance, Cleaning
Type 2036 Maintenance, Cleaning MAINTENANCE, CLEANING Cleaning Servicing intervals NOTE! Check the diaphragm valves regularly for proper operation in terms Avoid causing damage with cleaning agents. of assembly, installation and operation. ▶ Before cleaning, check that the cleaning agents are compat- ible with the device materials. -
Page 16: Malfunctions
Type 2036 Malfunctions MALFUNCTIONS TRANSPORT, STORAGE, PACKAGING Malfunction Cause / remedial action NOTE! Actuator Pilot air port interchanged does not Transport damage. CFA: Connect the pilot air port 1 and/or 3 switch Inadequately protected devices may be damaged during transportation. - Page 18 www.burkert.com...
Need help?
Do you have a question about the 2036 and is the answer not in the manual?
Questions and answers