Page 1
AG is now ams AG The technical content of this austriamicrosystems document is still valid. Contact information: Headquarters: ams AG Tobelbaderstrasse 30 8141 Unterpremstaetten, Austria Tel: +43 (0) 3136 500 0 e-Mail: ams_sales@ams.com Please visit our website at www.ams.com...
Description Info Supply Voltage Supply voltage ranging from 2.7V to 5.5V Ground Supplies the AS1119 with 5V. Connect to a Mini USB 5-pin Connector standard USB port. This Connector is not used for data transfer. Connect austriamicrosystems USB Interface I / O I²C Interface Connector...
Page 4
Drive the IC on the demo board only with the recommended settings and values as described in the datasheet. If not present get the datasheet for the AS1119 from www.austriamicrtosystem.com. First connect the power supply via connector “C” to a powered USB port and than power up the I/O - Interface “D”.
Page 5
AS1119 - Demo Board Manual Layout of Demo Board Board schematics and layout Figure 3: Schematic Figure 4: Top and Bottom Layer www.austriamicrosystems.com Revision 1.00 4 - 5...
Need help?
Do you have a question about the AS1119 and is the answer not in the manual?
Questions and answers