Advertisement
Accessing SC Series storage from the SAP HANA nodes
32
Dell EMC SC Series Storage Configuration Best Practices for SAP HANA TDI
SC9000, SC7020, SC5020, and SCv3020 Storage Arrays
Validation Guide
Note: If you are configuring the multinode cluster, repeat steps 1
6.
In SAP HANA Studio, specify the location of the DDBEA configuration file for data
and log backup, as shown in the following figure.
Figure 13. Specifying the DDBDA configuration file location
For more information about configuring DD Boost software with SAP HANA, see the
EMC Data Domain Boost for Enterprise Applications and ProtectPoint Database
Application Agent Installation and Administration
Backing up the database from SAP HANA Studio
Follow these steps:
1.
Log in to SAP HANA Studio and select Backup and Recovery > Back Up
System.
Figure 14. SAP HANA Studio Backup and Recovery menu
2.
Select the tenant database.
The Specify Backup Settings dialog box appears.
3.
In the Destination Type field, select Backint.
4.
Review the backup settings and click Finish to start the backup.
Recovering the database with SAP HANA Studio
To recover the SAP HANA database to the point when you backed it up, follow these
steps:
1.
Log in to the SAP HANA Studio, and then select Backup and Recovery.
2.
Select the tenant database.
3.
Select Recover the database to its most recent state.
–
5 for all nodes.
Guide.
Dell
Hide quick links:
Advertisement
