Dell EMC SC Series Validation Manual page 22

Configuring SC Series array storage for SAP HANA using Dell EMC DSM Client
Configuring
snapshot
profiles
22 Dell EMC SC Series Storage Configuration Best Practices for SAP HANA TDI
SC9000, SC7020, SC5020, and SCv3020 Storage Arrays
Validation Guide
Figure 8. Edit Storage Profile dialog box
3. In the Edit Storage Profile dialog box, enter or select the following details:

General

Name: Profile for HANA Vol

Data Writes

Write Tier: Tier 1

Write RAID Type: Mirrored (RAID 10)

Snapshot Data

Tier 1 Snapshot RAID Type: Parity (RAID 5 / RAID 6)

Tier 2 Snapshot RAID Type: Parity (RAID 5 / RAID 6)

Tier 3 Snapshot RAID Type: Parity (RAID 5 / RAID 6)
4. Click OK to proceed.
To configure snapshot profiles, follow these steps:
1. Click Create Snapshot Profile to start a snapshot profile for the storage array.
2. In the Edit Snapshot Profile dialog box, enter or select the following details:

Name: Replay Profile for HANA Vol

Snapshot Creation Method: Standard
3. Click + Add Rule, and create a schedule for the snapshot profile―for example:

Name: Daily at 7:00 PM

Frequency: Daily