3Com TokenLink Velocity 3C319 User Manual page 55

5 In the Add Network Adapter dialog box, scroll to
the bottom of the Network Adapter Card selection
list. Select <Other> Requires disk from manufacturer.
6 Click Continue.
7 Type the following path at the prompt:
a:\
This path identifies the location of the NDIS 4
OEMSETUP.INF file for Windows NT 3.51.
8 Click OK to select the NIC.
The driver files are copied to the C: drive. A prompt
appears, asking if you want to restart your computer.
9 Remove the TokenDisk diskette and click
Restart now.
This completes the installation.
Auto ring speed detection is automatically enabled when
you install the NDIS 4 driver for Windows NT. If you want
to disable auto ring speed detection, see
Speed
The DynamicAccess Class of Service feature is disabled
by default when you install the NDIS 4 driver for
Windows NT. To activate Class of Service, see
"Configuring DynamicAccess Class of
Windows NT 4.0
Follow these steps to install the 3Com NDIS 4 driver for
Windows NT 4.0:
1 In the My Computer group, double-click the
Control Panel icon.
2 In the Control Panel group, double-click the
Network icon.
3 In the Network dialog box, click the Adapters tab.
4 In the Adapters tab, click Add.
Installing the NDIS 4 Driver for Windows NT
Detection" in Chapter
"Auto Ring
7.
Service."
6-3
Chapter 7,