Installing The Ndis 4 Driver For Windows 95 Osr2 - 3Com TokenLink Velocity 3C319 User Manual

4-6 C
HAPTER
14 Remove TokenDisk diskette #2 from the
floppy drive.
15 Click Yes to restart your PC to activate the driver.
This concludes the procedure for installing the NDIS 4
driver for retail Windows 95 without PnP support.
Auto ring speed detection is automatically enabled when
you install the NDIS 4 driver for Windows 95. If you want
to disable auto ring speed detection, see
Speed
The DynamicAccess Class of Service feature is disabled
by default when you install the NDIS 4 driver for
Windows 95. To activate Class of Service, see
"Configuring DynamicAccess Class of

Installing the NDIS 4 Driver for Windows 95 OSR2

Follow these steps to install the driver for Windows 95
OEM Service Release 2 (OSR2) version 950b. It is assumed
that you are already running Windows 95.
During installation, have the Windows 95 software
accessible on diskettes, CD, or hard drive in case the
installation utility requests files from the Windows 95
software library.
1 Install the 3C319 NIC and start the computer.
Windows 95 detects the new hardware. ISA Token Ring
Controller appears in the New Hardware Found dialog
notice. The Update Device Driver Wizard dialog
box appears.
2 Click Next.
3 Click Other Locations.
The Select Other Locations dialog box appears.
4 Insert TokenDisk diskette #2 in the floppy drive.
5 Type the following path and click OK:
a:\
4: I N
NSTALLING A ETWORK
Detection" in
D W
RIVER FOR INDOWS
Chapter 7.
95
"Auto Ring
Chapter
Service."
7,