Plug And Play (Pnp); Configuration Mode - 3Com TokenLink Velocity 3C319 User Manual

Plug and Play (PnP)

This option enables a PC with Plug and Play (PnP) support
to allocate resources for the 3C319 NIC. The resources
allocated in a PnP system include:
The default for PnP is enabled. Disable PnP to configure
the 3C319 NIC with the Configuration and Diagnostic
Program. For instructions, see the section
Configuration Option
Configuration Mode
This 3C319 NIC provides the following two modes
of operation:
I/O Base Address
BIOS/MMIO Address Location
Shared RAM Page Size and Address Range
Interrupt Request Level
Memory Mode
I/O Mode
IRQ Driver Type
AutoSwitch
Boot PROM
Zero Wait State
I/O base address
Interrupt request level
BIOS/MMIO base address
Shared RAM base address
3Com mode
IBM mode
Configuration Options
Settings" earlier in this chapter.
5-7
"Changing