Sd Card Slot - Garmin GPS 175 Pilot's Manual

System at a Glance
1.4

SD Card Slot

NOTE
Do not remove or insert an SD card while in flight. Always verify the system
is powered off before inserting or removing an SD card.
The navigator requires an SD card for the following tasks.
•
Exporting data logs
•
Capturing screen images
•
Upgrading software
INSERT AN SD CARD
When inserting an SD card:
1. Verify unit power is off and the slot is empty.
2. Hold card such that label faces left edge of display screen.
3. Ensure back edge of card is flush with display bezel after insertion.
EJECT AN SD CARD
1. Power off the unit.
2. Release the spring latch by pressing lightly on exposed edge of card.
1-6
•
•
•
GPS 175/GNX 375 Pilot's Guide
Saving system configurations
Enabling Flight Stream connectivity
Updating databases
190-02207-02 Rev. B